Blowerproof Ireland


Blowerproof

Liquid Airtight Paint and Spray on Membrane

Blowerproof breathable liquid airtight membrane can be applied using brush roller or sprayed on.


Wall to ceiling junction

The wall to ceiling junctions on all floorlevels along the outer skin of a house or building need to be made airtight.


Window jambs

Fill gaps between the window frame and the wall with PU foam and cut off excess then brush on Blowerproof for airtight seal.


Walls

Spray On Blowerproof liquid airtight membrane is the product of choice for professionals want to reach Passive Standard.


Floor to wall junction

The floor to wall junctions on all floorlevels need to be made airtight. Apply Blowerproof coating before the floor insulation and screed is done.




Why Use Blowerproof?

Airtightness
100%
Breathable
100%
Easy to Apply
100%
Value for Money
100%

Spray-on Airtightness Solutions

Blowerproof Spray-on

BBA approved BLOWERPROOF LIQUID airtight coating is spray applied with an airless paintspray machine. This product is mainly recommended on large projects.

Areas of use

  1. Floor/wall connections
  2. Wall/ceiling connections
  3. Entire walls
  4. Wall/wall connections
  5. Vertical and horizontal joints

Application of Spray-on

  1. BLOWERPROOF LIQUID SPRAY is ready-to-use; mix with hand mixer before application. Do not dilut with water or solvents.
  2. Apply with an airless paint spray device.
  3. Cleaning airless device: with water.
  4. Apply BLOWERPROOF LIQUID SPRAY in two layers, at a total consumption of 0.5 - 1 kg/m².
  5. Complete drying is requested prior to applying another product on BLOWERPROOF LIQUID SPRAY (such as plaster). Drying time may vary and depends on local conditions and condition of the substrate. Indicative: 24 - 48 hours.

Paint-on Airtight Coatings

Blowerproof Paint-on

Blowerproof is a BBA approved paint on airtight coating and is ideal for any permanent solution in achieving your buildings airtightness. This product is widely used in Europe in passive houses.
It is easy to apply and because of its durability and efficiency it has become the product of choice in all passive building in Belgium

Areas of use

  1. Floor/wall connections
  2. Wall/ceiling connections
  3. Window/wall connections
  4. Pipe penetrations
  5. Walls
  6. Wall/wall connections
  7. Vertical and horizontal joints
  8. Curtain walls
  9. Wall/roof connections (steel deck)


Application of Paint-on

  1. BLOWERPROOF LIQUID BRUSH is ready-to-use; stir before use. Do not dilute with water or solvents.
  2. Apply with a flat paintbrush, suitable for water-based paints. Apply in two layers, the second layer after complete drying of the first layer. Total advised indicative consumption: 0.5 - 1 kg/m².
  3. Clean paint brush and other tools with water.
  4. During drying avoid contact with any type of water, liquids or other construction products.
  5. Complete drying is required prior to applying another product on BLOWERPROOF LIQUID BRUSH (such as plaster).
  6. Drying time may vary and depends on local conditions and condition of the substrate. Indicative: 24 - 48 hours.
  7. For large applications we recommend BLOWERPROOF LIQUID SPRAY applied with an airless paint spray machine.

Application Areas

Floor to wall junction

Paint-on or spray apply BBA approved BLOWERPROOF coating for the permanent airtightness of the floor to wall junctions.

For private houses and small scale projects; The floor to wall junctions on all floorlevels need to be made airtight. Apply Blowerproof coating before the floor insulation and screed is done, and before the inside wall finish is applied.

For larger scale projects:
The floor to wall junctions on all floorlevels need to be made airtight. Apply Blowerproof coating before the floor insulation and screed is done, and before the inside wall finish is applied.


Wall to ceiling junction

Paint-on or spray apply BBA approved BLOWERPROOF coating for the permanent airtightness of the wall to ceiling junctions.

For private houses and small scale projects.
The wall to ceiling junctions on all floorlevels along the outer skin of a house or building need to be made airtight. Apply on the inside, before the wall finish is applied.

For larger scale projects
The wall to ceiling junctions on all floorlevels along the outer skin of a house or building need to be made airtight. Apply on the inside, before the wall finish is applied.


Floor to wall junction

Paint-on or spray apply BBA approved BLOWERPROOF coating for the permanent airtightness of the floor to wall junctions.

Application

  1. Fill gaps between the window frame and the wall with PU foam and cut off excess
  2. Apply protection tape on the profiles at about 5mm from the side
  3. Brush on Blowerproof Liquid Brush
  4. Remove tape immediately after application

Pipe penetrations gaps

Penetration gaps must be made airtight in order to obtain an airtight house or building. Sealing is simple with BBA approved Blowerproof coating.

Application method

  1. Ensure dustfree surface
  2. Fill gaps greater than 5mm with polyurethane foam (trim after drying) or use a cement based fast setting mortar
  3. Apply Blowerproof Liquid Brush in two coats
  4. Check for full coverage


Walls

Application method Paint:

  1. Ensure dustfree surface and remove loose parts.
  2. Close gaps > 5mm with a cementbased gap filling mortar.
  3. Brush apply Blowerproof Liquid Brush

Application method Spray:

  1. Ensure dustfree surface and remove loose parts.
  2. Close gaps > 2mm with a cementbased gap filling mortar.
  3. Spray apply Blowerproof Liquid


Contact Us

Thank You!

Your message was successfuly sent , We will get back to you very soon.


30 mins from Dublin City



BBA Certification

Blowerproof is a BBA approved paint or spray on airtight coating and is ideal for any permanent solution in achieving your buildings airtightness.
This product is widely used in Europe in passive houses.


Nationwide Merchant Surplier

AG Roofing & Insulation Ltd
Phone: 01 4853634
Mobile: Alan Glennon 087 4348856
Mobile: Dermot Kearns 087 0526909
info@agroofingandinsulation.ie
www.agroofingandinsulation.ie




Blowerproof Ireland

Blowerproof Ireland

Unit 2,
Charvey Lane,
Rathnew,
Co. Wicklow
Phone: 0404 66111
Email: info@blowerproof.ie